RRP Bearing Press & Extraction Tool
The Bearing Press & Extraction Tool (BPET) is designed for the ‘Home Mechanic’ for use on ‘LINKAGE BEARINGS’, however it still works on many pivot and hub bearings.
This tool is designed for the competent home mechanic who has reasonable knowledge and experience of working on bikes. This tool is designed to extract and insert linkage bearings, however the tool can also be used to press and extract bearings on some hubs and freehub bodies
- Note: all bearing kit adaptors are sold separately. Bearing Kits 1, 2 & 3 don’t have male adaptors (just female ones) due to the small size of the bearing bore hole. Bearing Press Tool is not included with any bearing kit.
Instructions for use
Firstly, ensure you have the correct RRP Bearing Kit to match the bearings you intend to insert / extract (see list below). You can identify which kit you need either by reading the bearing number written on the rubber seal, or you can measure the inner bore race and outer race of the bearing (as shown below) and match it to our list below
(NB: the handle arms have been reduced in length and thickness to decrease the torque available reducing the risk of damage from misalignment / incorrect installation)
Extracting Bearings (RED adaptors) - SOLD SEPARATELY
Place the RED adaptors from your RRP BEARING KIT as shown below, take time to ensure that all the parts fit flush and are aligned to prevent any damage to parts or frame. In particular check that the female adaptor cup is flush on the frame to prevent frame damage.
Wind on the main handle until the parts all come together, make a final check that everything is aligned properly. Continue to wind on the main handle which will allow the male adaptor to pull on the inner race of the bearing and extract it into the female adaptor cup (NB: The male adaptor passes through the female adaptor to ensure a uniform and true extraction*), it will become harder to turn once the bearing starts to extract. After a couple of turns stop and check that the bearing is extracting properly before continuing
Inserting Bearings (BLUE adaptors) - SOLD SEPARATELY
Place the BLUE adaptors from your RRP BEARING KIT as shown below, take time to ensure that all the parts fit flush and are aligned to prevent any damage to parts or frame.
Wind on the main handle until all the parts come together, the male adaptor should be pressing on the outer race of the bearing you are inserting. Make a final check that everything is all aligned. Continue to wind on the main handle, the male adaptor will press onto the outer race of the bearing and insert it (NB: The male adaptor passes through the female adaptor to ensure a uniform and true insertion*), it will become harder to turn once the bearing starts to insert. After a couple of turns stop and check that the bearing is inserting properly before continuing
Bearing Kits (Sold Separately)
Please see sizing guide
Occasionally, without notice, manufacturers change product design and/or specifications.
| BEARING Name | KIT NO | RRP CODE | BORE SIZE | OD SIZE |
| 688 2rs | 1 | BPET688 | 8 | 16 |
| 698 2rs / 398v | 2 | BPET698 | 8 | 19 |
| 608 2rs / 608E-2rs | 3 | BPET608 | 8 | 22 |
| 609 2rs | 3a | BPET609 | 9 | 24 |
| 6800 2rs / 61800 2rs | 4 | BPET6800 | 10 | 19 |
| 6900 2rs / 61900 2rs | 5 | BPET6900 | 10 | 22 |
| 6000 2rs | 6 | BPET6000 | 10 | 26 |
| 6801 2rs / 61801 2rs | 6a | BPET6801 | 12 | 21 |
| 6901 2rs / 61901 2rs | 7 | BPET6901 | 12 | 24 |
| 6001 2rs | 8 | BPET6001 | 12 | 28 |
| 3802 2rs / 63802 2rs / 6802 2rs / 61802 2rs | 9 | BPET63802 | 15 | 24 |
| 1526 2rs | 10 | BPET1526 | 15 | 26 |
| 6902 2rs / 6902E-2rs / 61902 2rs / 7902 | 11 | BPET6902 | 15 | 28 |
| 6002 2rs | 12 | BPET6002 | 15 | 32 |
| 6803 2rs / 61803 2rs | 13 | BPET6803 | 17 | 26 |
| 17287 2rs | 13a | BPET17287 | 17 | 28 |
| 6903 2rs / 6903E-2rs / 61903 2rs / 61903E-2rs | 14 | BPET6903 | 17 | 30 |
| 6003 2rs | 15 | BPET6003 | 17 | 35 |
| 6804 2rs / 61804 2rs | 16 | BPET6804 | 20 | 32 |
| 6805 / 61805 2rs | 17 | BPET6805 | 25 | 37 |
| Bearing Press & Extraction Tool(BPET) | BPETHTB |
BORE:Bore hole size of bearing (hole in the centre)
OD:Outer diameter of bearing race
Customer reviews and Q&A's are disabled because you declined functional cookies.
To enable reviews and Q&A's click the 'Cookie Settings' button below and enable functional cookies.
RRP Bearing Press & Extraction Tool
Available with supplier
- usually despatched in 4-5 working daysWell machined, fairly easy to use. Hole through the centre is M8 so can be used with thread bar or bolts (best with hex heads for spanner). For double bearings, used an old bearing align the extraction pieces. Blue insertion piece was too long to fully seat the bearing so padded it with an old bearing for the final few turns.
Cycle to Work is a salary sacrifice scheme, where you can save up to 42% off a new Bike and Safety equipment. This means the cost is deducted from your salary as a non-cash benefit, so you save on tax and national insurance.
Here at Tredz, we accept Cycle to Work vouchers from all national schemes. For more information click here.
At Tredz we make finance easy. You can choose from a range of flexible finance repayments from 6 months up to 48 months, choose to place a deposit and pay the balance on finance. Go with a 0% APR finance deal with absolutely no interest on payments, or a 9.9% APR Buy Now Pay later option with a choice of 12 or 24 deferred payment options, or a longer-term 14.9% APR option with lower monthly payments. For more information click here.
At Tredz, we’re committed to bringing you the best products at the best prices. If you find a product cheaper elsewhere, simply contact us for an immediate response using our live chat service. Click here to discuss your price match with an agent now for help.
Subject to Terms and Conditions
At Tredz, we offer a fast high quality service, with a range of options from free delivery on orders over £30, next day and convenient click & collect from one of our stores. Simply select within the checkout.
*Courier deliveries to Northern Ireland, Isle of Man, Isle of Wight, Channel Islands and the Scottish Highlands/Islands will incur a charge.At Tredz, if you are not 100% happy with your order, then you can use our simple hassle free returns service. Simply return the item new and unused in the manufacturers original packaging within 365 days of purchase. Bikes and larger items are collected by courier.
When you receive your bike, all you'll need to do is unpack it, attach the pedals, turn the handlebars and ride.
To help you get started we have put together a handy Bike Building Guide, click here.