Merida eOne-Forty 4000 2020 - Electric Mountain Bike

The brand new Merida eOne-Forty 4000 uses exactly the same frame as the eOne-Sixty but with a shorter shock stroke. The entry level in to Merida's new integrated battery carbon eBike rangle the eOne-Forty is based around the Shimano Steps E7000 60NM motor with Shimano Steps E7000 mode lever and high capacity Shimano Steps E8035 504W battery. To keep prices down, the bike does not come with a Shimano display but using the Bluetooth junction can be paired with your Garmin device or phone.

Key Features:

• Carbon frame with alloy swing arm and fully integrated battery pack
• SR Suntour Raidon 34 fork offers 140mm of controlled suspension travel
• SR Suntour Edge air shock controls the 140mm of rear wheel travel
• Shimano Deore 10 speed drivetrain for easy gear shifting
• Shimano 4-piston hydraulic disc brakes for powerful speed control
• Sizes: Small, Medium, Large, X Large, XX Large
• Colours: Sparkling Red/Black
• The Merida EOne-Forty 4000 is available with 0% APR finance

Drive information:

• Motor: Shimano Steps E7000 70Nm
• Battery: Shimano E8035 504Wh internal battery pack
• Connectivity: Bluetooth smart phone and PC app

Technology:

Thermo Gate:

Forged aluminium part integrated into the headtube. Works like a chimney so hot air can rise up and escape. When riding, heat build up from the battery is not usually an issue, but if the bike was laid in the sun for a long time heat could build up.

Wheel Size:

Mixed wheel sizes to get the best of both worlds. 29" front wheel for better ‘roll over
performance’ with a 2.5" wide tyre for precise steering. 27.5" rear wheel with 2.6" tyres give
maximum traction and comfort. The smaller rear wheel size allows shorter chainstays for a more agile and playful character.

Internal Block:

To prevent the fork crown hitting the down tube we use an ‘Internal Block’ integrated into the frame. A clamp is installed on the fork steerer. If the steering angle is too extreme the clamp hits the rubber protection block inside the frame. Just in case the clamp does rotate on the steere, there's additional rubber protection under the head tube.

Easy Charging:

The internal battery can be accessed easily, pulling a rubber strap, sliding forward the panel and opening, the battery can then be removed by a small turn of an Allen Key (provided). But the battery doesn't need to be removed as a satellite charging port can be used.

Rattle Free:

Two part battery cover, the outer layer reduces noise through its soft material and tight fit, while the hard plastic inner layer gives it the structural shape. Key components i.e. the rubber strap and o-rings, can be replaced. Almost all connection points between battery and frame have a rubber layer between them too.

Bottle Bosses and Cable Routing:

A new clamp system makes it easy to organise and route cables inside the downtube whilst also providing bottle bosses on the outside. Bottle cages can be put in two positions. The upper one must be used when a piggyback shock is mounted. For Gen II a bottle can be mounted to all frame sizes.

Battery Wake-Up:

If the bike has not been used for more than 6 months, or when the battery of the on/off switch is empty (this battery is normally charged by the main battery) it's necessary to wake the battery up again, simply push a 4mm Allen key (on the Merida Expert TR axle) through the hole on the downtube and press the hidden button underneath

Lifeteime Warranty:

Covers the entire ownership of the original purchaser. This applies to manufacturing and material defects and includes bikes used for racing.*A rider and equipment weight limit of 120kg applies.

Occasionally, without notice, manufacturers change product design and/or specifications.